1000 Plus Series
Specifications
| Number of beams | 2 - 48 |
|---|---|
| Object detection capability | 30mm, 40mm plus 2, 3 and 4 beam perimeter systems |
| Detection zone | 180mm - 1240mm |
| Range | 0.5 - 10m (model dependent) |
| Light type | Infrared 880nm |
| Response time | 40ms |
| Operating temperature | 0 °C to +50 °C |
| Enclosure rating | IP65 |
| Enclosure | (H x W x D) H x 28 x 41mm |
| Finish | Aluminium chromate treated, yellow polyester powder coated |
| Status indicators | Status & Diagnostic LEDs |
| Status indication | Transmitter (TX) Yellow LED on (flashing) = TX ok Receiver (RX) Red LED on (steady) = OSSDs off Red LED (flashing) = System lockout Green LED = OSSDs on Yellow LED (flashing) = TX to RX communications established Yellow LED (steady) = Incorrectly aligned or detection zone is blocked |
| Power supply requirement | 24V DC 1.5A ± 20% |
| Current consumption | 200mA transmitter (TX) + 200mA receiver (RX) (OSSD load additional) |
| Connection | 5m cable included on transmitter (TX) and receiver (RX) |
| Classification | BS EN 61496-1, BS IEC 61496-2 Type 2, BS EN 954-1 Category 3, EN ISO 13849-1 PL d, BS EN 61508 SIL 2 |
| Warranty | 1 Year |
| Safety outputs | 2 x electronic switches (OSSD 1 & OSSD 2), each rated at 24V DC, 500mA. On = 24V DC, Off = 0V DC. St |
| Product Conformity | The 1000 Plus series has passed Type Examination from European Notified Body, SAFENET to the Machinery Directive. Certification provides users with an assurance that the 1000 Plus series meets all relevant legislative safety requirements. Together with our ISO 9001:2008 certification full confidence can be placed in the quality, reliability and above all the safety of Smartscan equipment. |
